6 Amp Intelligent Distributed Power Module


TR-RPS1 is an intelligent distributed power module that adds 6.0 amps of power, six Flexput™ I/O circuits, and two Form C relay circuits to a compatible Triga Series addressable system.


TR-RPS1 connects to the FACP via the RS-485 system bus allowing up to an additional 6,000 feet of wiring. Each TR-RPS1 is optically isolated providing ground loop isolation and transient protection. TR-RPS1 supports its own backup battery and monitors the AC power.


The Flexput circuits can be programmed as notification appliance circuits, continuous, re-settable, or door holder power, or as conventional initiation circuits for 2 or 4-wire smoke detectors and contact devices (e.g. pull stations) Installation.


The TR-RPS1 are compatible with the following Triga Series FACP’s:
• TR-2100ECSR / TR-2100ECSB (63 max per panel)
• TR-2100R / TR-2100B / TR-R2100R / TR-R2100B (63 max per panel)

Contact Us to Purchase

• 6.0 amps output power
• Supports Class A (Style 6) and Class B (Style 4) configuration of the SBUS
• Two Form C programmable relays rated at 2.5A @ 24 VDC
• Ground loop isolation and transient protection
• Provides SBUS optical isolation and re-conditions the RS- 485 signal
• Built-in synchronization for appliances from System Sensor®, AMSECO, Gentex®, and Wheelock®
• Up to 6,000 foot wiring distance from the TR-RPS1
• Battery charging capacity is 35AH
• Large cabinet size can house two 18AH backup batteries or RBB accessory cabinet can house battery sizes larger that 18AH
• Room to mount two TR-6815 SLC expander modules
• Six onboard Flexput circuits programmable for:

  1. Notification appliance circuits (Class B/Style Y & Class A/Style Z)
  2. Conventional initiation circuits (Class B/Style B & Class A/Style D) both 2- and 4-wire
  3. Auxiliary power (for door holders, continuous power, or resettable power)

Mounting Dimensions: 14.5” W x 24.75” H x 3.9” D (36.8 cm W x 62.9 cm H x 9.8 cm D)
Overall Dimensions: 16.1” W x 26.4” H x 4.1” D
(40.6 cm W x 67 cm H x 11.8 cm D)
Color: Black


Operating Temperature: 32ºF-120ºF (0ºC-49ºC) Humidity: 10%-93% non-condensing


Primary AC: 120 V, 50 or 60Hz, 2.5A, or 240V, 50 or 60Hz, 1.4A
Total Accessory Load: 6A @ 24VDC


Standby: 40mA
Alarm: 160mA
SBUS Standby & Alarm: 10mA
Flexput Circuits:
Notification: 3amps per circuit (6A system total) Initiation: 100mA power limited @ 24VDC


TR-RPS1: High voltage (240V) Intelligent Distributed Power Module


RBB: Remote Battery Box Accessory Cabinet. 16” W x 10” H x 6” D (406 mm W x 254 mm H x 152 mm D) AB-55: Remote Battery Box Accessory Cabinet. 20”W x 12” H x 7.5” D
TR-6815: SLC Expander Module
TR-SCK: Seismic Compliance Kit


NFPA 13, NFPA 70, NFPA 72, UL 2572, UL 1711 & UL 864: Local Protective Signalling Systems.
UL Listed, FM approved

Contact Us

Subscribe to stay up to date on all the latest news

Click one of our representatives below to chat on WhatsApp.