Under Ground Hydrant

NAFFCO under ground fire hydrants are valves of screw down type and are suitable for a maximum working pressure of 16 bar.

The underground fire hydrants are manufactured to comply to BS 750:2012 and EN 14339:2005 standards with screwed outlet threaded to BS 336:2010 standard.

Model NHYD058
Valve Type Screw down (type 2C)
Nominal Size & Flange Drilling Flange-X
PN16, DN80, BS EN 1092-2
PN16, DN80, BS EN 1092-2
PN16, DN80, BS EN 1092-3
Working Pressure 16 Bar maximum
Test Pressure (Body) Body 25 Bar
Seat 20 Bar
Flange Drilling BS 4504 Part : 2 : 1974 Table : 16/21
  • BSI Kitemark certified
  • Body material made of grey cast iron to BS 1503-3
  • Material of spindle and threaded part of valves which engages with it is made of stainless steel to BS 10088-1
  • Material for the screwed outlet is made of high tensile brass to BS 12163:2011
  • Spindle sealings (two seals) is of the toroidal sealing ring ('0' ring) type and are capable of changing while the valve is under pressure and fully closed
  • A wiper ring is positioned above the spindle sealing’s to prevent the ingress of foreign matter
  • Each hydrant shot is blasted (inside and outside) to SA 2 1/2 std
  • All cast iron parts are thoroughly cleaned and painted

Contact us about Under Ground Hydrant:

Call us now for any assistance
This site uses some unobtrusive cookies to store information on your computer. By using our site you accept our Terms And Conditions and Privacy Policy. ×