End to End Beam Detector

Contact Us to Purchase
Operating Range 5 - 120 m
Operating Voltage Range 12 to 36 VDC ±10%
Operating Controller Current
(with 1 or 2 Receivers)
14 mA (constant)
Operating Transmitter Current 8 mA (per Transmitter)
Power Down Reset Time >20 seconds
Fire and Fault Relay Contacts Resistive VFCO 2A @ 30 VDC
Operating Temp. (non-condensing) -20°C to +55°C
Optical Wavelength 850 nm
IP Rating IP54
Relative Humidity (non-condensing) 93%
Dimension (W x H x L) & Weight
Control Unit 203 mm x 124 mm x 71 mm, 600 g
Transmitter & Receiver 78 mm x 77 mm x 161 mm, 200 g
  • Separate Transmitter and Receiver Heads
  • Range 5 m to 120 m, configurable per set of Detectors
  • Lateral Spacing per NFPA 72 is 18 m
  • Integral Laser Alignment in Receiver
  • 2-wire Interface between Controller and Receiver
  • Single and Twin Channel capability
  • Separate Fire and Fault Relays per Detector
  • Low Level Controller with LCD display
  • Programmable Sensitivity and Fire Threshold
  • Automatic Gain Control (AGC) for drift compensation
  • Built-in electronic UL/ULC obscuration-acceptance fire test
  • Knockouts for ease of installation and wiring
  • Optional Transmitter powering from Controller

Contact Us

Subscribe to stay up to date on all the latest news

Click one of our representatives below to chat on WhatsApp.