We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Fixed Type CAF System
The NAFFCO Fixed type Compressed Air Foam Fire Suppression System uses compressed air to propel firefighting foam. Thousands of tight radius bubbles quickly cool and smother a fire by providing a thick Vapor-sealing blanket of foam that virtually eliminates re-ignition.
The foam will adhere to horizontal and vertical surfaces. This system allows the operator to seal a fuel spill and flammable Vapors with foam thus reducing or eliminating a potential fire.
The system will discharge the foam approximately 25-30 meters in a no wind condition allowing fire-fighting personnel without protective clothing to avoid thermal injuries. Trained personnel can accomplish all maintenance except hydrostatic pressure testing of the Air Cylinders, Premix Tank, and the Discharge Hose.
Contact Us to Purchase
Features
- Immediately isolate the surrounding Fire, protects transferring the fire to other places and prevent ignition of Fire further.
- Saving time and water for Civil Defense Personnel while they fight with Fire.
- Reducing damage to structures happens due to water.
- Allows Firefighters a better safety distance from Fire.
- Light hose lines for less stress for Fire-Fighters.
- Less environmental damage.
- Foamed areas signal a cooled surface.
- Less water runoff carrying pollutants.
- Reduced smoke emissions
- Less pressure needed due to lack of friction loss.
Specifications
|
FIXED TYPE |
||
|
Extinguishing Agent |
CAFS Special Foam |
CAFS Special Foam |
|
Capacity (gallon) |
400 gallons |
500 Gallons |
|
Foam Selection |
Dry/Wet |
Dry/Wet |
|
Working Pressure for foam Cylinder |
8/10 bar |
8/10 bar |
|
Cylinder Material |
Stainless Steel, Grade 316 L |
Stainless Steel, Grade 316 L |
|
Test Pressure |
30 bars |
30 bars |
|
Filling Pressure of Air Cylinder |
150 bars |
150 bars |
|
Range Of Discharge |
22-25 m |
22-25 m |
|
Discharge Duration |
8 min. |
10min. |
|
Hose size & Length |
1” or 1½" x 30 m |
|
|
Operating temperature limits |
+5° C to +60° C |
+5° C to +60° C |
Resources
|
Product Manual |
