Kitemark and LPCB Approved Hose, Type 2
Single jacket fire hose consists of an impermeable elastomeric
lining, a synthetic fibre reinforcement and externally applied
elastomeric coating to the reinforcement. Delivery hoses are
non-percolating lay flat type used in fire fighting purposes.
Hoses are suitable for use with couplings with the requirements
of BS 336: 2010 standards. Hose is intended for use at working
pressure not exceeding 15 bar. Delivery hose are manufactured
to comply BS 6391: 2009 Standards
• BSI Kitemark and LPCB Certified.
• Light weight and flexible.
• Hose belongs to Type 2 with Elastomeric lining, Synthetic
fibre reinforcement and elastomeric coating on the
reinforcement.
• Hose provides good protection against the absorption of
liquids and resistance of the reinforcement.
• Anti rot and anti twist.
• Hose with couplings are wound by Galvanized
mild steel/SS wire.
B) KITEMARK AND LPCB APPROVED HOSE, TYPE 2
APPLICATIONS
• Industrial and rural fire brigades as well as building
protection.
• For general industrial, commercial and civil engineering
applications.
HOSE DATA
Hose
Available Color
Standard Length
: Type 2
: Red, White
: 25/30 Meters
Model Number |
Diameter (in.) |
Service Test Pressure (bar/psi) |
Hydrostatic Strength Test Pressure (bar/psi) |
Standard Compliance/ Approvals |
NF-DH2-65R |
2.5 |
15/215 |
50/725 |
BS 6391: 2009/ Kitemark& LPCB |
NF-DH2-65W |
NH threaded. Storz & instantaneous coupling or other types are available upon request with approval.