TR-HEAT
APPLICATIONS
Use thermal detectors for protection of property. For further information, refer to manual which provides detailed information on detector spacing, placement, zoning, wiring, and special applications.
INSTALLATION
The TR-HEAT-W Series plug-in detectors use a separate base to simplify installation, service, and maintenance. Installation instructions are shipped with each detector. Mount base (all base types) on an electrical backbox which is at least 1.5″ (3.81 cm) deep.
NOTE:
• Because of the inherent supervision provided by the SLC loop, end-of-line resistors are not required. Wiring “T-taps” or branches are permitted for Style 4 (Class “B”) wiring.
• When using relay or sounder bases, consult the installation sheet for device limitations between isolator modules and isolator bases.
ORDERING INFORMATION
TR-HEAT-W: White, low-profile intelligent 135°F fixed thermal sensor.
TR-HEAT-IV: Ivory, low-profile intelligent 135°F fixed thermal sensor.
TR-HEAT-ROR-W: White, low-profile intelligent rateof- rise thermal sensor.
TR-HEAT-ROR-IV: Same as TR-HEAT-ROR-W, but in Ivory.
TR-HEAT-HT-W: White, low-profile intelligent 190°F fixed thermal sensor. Must be mounted to one of the bases listed below TR-HEAT-HT-IV: Ivory, low-profile intelligent 190°F thermal sensor. Must be mounted to one of the bases listed below.
TR-HEAT-W: White, low-profile intelligent 135°F fixed thermal sensor.
TR-HEAT-IV: Ivory, low-profile intelligent 135°F fixed thermal sensor.
TR-HEAT-ROR-W: White, low-profile intelligent rateof- rise thermal sensor.
TR-HEAT-ROR-IV: Same as TR-HEAT-ROR-W, but in Ivory.
TR-HEAT-HT-W: White, low-profile intelligent 190°F fixed thermal sensor. Must be mounted to one of the bases listed below TR-HEAT-HT-IV: Ivory, low-profile intelligent 190°F thermal sensor. Must be mounted to one of the bases listed below.
INTELLIGENT BASES
Note: Detectors must be mounted to one of the Intelligent Bases listed below.
TR-B300-6: White, standard flanged low-profile mounting base.
TR-B300-6-IV: Ivory, standard flanged low-profile mounting base.
TR-B501-WHITE: White, standard European flangeless mounting base.
TR-B501-BL: Black, standard European flangeless mounting base.
TR-B501-IV: Ivory, standard European flangeless mounting base.
TR-B200S-WH: White, Intelligent, programmable sounder base.
TR-B200S-IV: Ivory, Intelligent, programmable sounder base.
TR-B200SR-WH: White, Intelligent sounder base for retrofit applications.
TR-B200SR-IV: Ivory, Intelligent sounder base for retrofit applications.
TR-B200SR-LF-IV: White, Low Frequency Intelligent, programmable sounder base.
TR-B200S-LF-IV: Ivory, Low Frequency Intelligent, programmable sounder base.
B200SR-LF-WH: White, Low Frequency Intelligent sounder base for retrofit applications
TR-B200SR-LF-IV: Ivory, Low Frequency Intelligent sounder base for retrofit applications.
TR-B224RB-WH: White, plug-in relay base.
TR-B224RB-IV: Ivory, plug-in relay base.
TR-B224RB-WH: White, plug-in isolator detector base.
TR-B224BI-IV: Ivory, plug-in isolator detector base.
ACCESSORIES
TR-RA100Z: Remote LED annunciator. 3-32 VDC. Mounts to a U.S. single-gang electrical box. For use with TR-B501 and TR-B300-6 bases only.
• Sleek and stylish contemporary design
• Advanced thermal technology for fast response
• Fixed temperature model (TR-HEAT-W & TR-HEAT-IV) factory preset to 135°F (57°C)
• Rate-of-rise model (TR-HEAT-ROR-W & TR-HEAT-ROR-IV), 15°F (8.3°C) per minute
• High temperature model (TR-HEAT-HT-W & TR-HEAT-HT-IV) factory preset to 190°F (88°C)
• Addressable by device
• Two-wire SLC connection
• Visible LEDs “blink” every time the unit is addressed
• Built-in tamper-resistant feature
• 360°-field viewing angle of the visual alarm indicators (two bi-color LEDs). LEDs blink green in Normal condition and turn on steady red in Alarm.
• Integral communications and built-in device-type identification
• Remote test feature from the panel
• Built-in functional test switch activated by external magnet
• Walk test with address display (an address of 121 will blink the detector LED 12-(pause)-1)
• Low standby current
• Designed for direct surface or electrical box mounting
• Sealed against back pressure
• Plugs into separate base for ease of installation and maintenance
• SEMS screws for wiring of the separate base
• Optional remote, single- gang LED accessory
PHYSICAL
Height: 2.0″ (51mm) installed in TR-B300-6 base
Diameter: 6.2″ (156mm) installed in TR-B300-6 base 4.1″ (104 mm) installed in TR-B501 base
Weight: 3.4 oz (95 g)
ENVIRONMENTAL
Operating Temperature range:
Heat -Fixed temperature (TR-HEAT-W/TR-HEAT-IV): -4°F to 100°F (-20°C to 38°C)
Heat -Rate of Rise (TR-HEAT-ROR-W/TR-HEAT-ROR-IV): -4°F to 100°F (-20°C to 38°C)
Heat -High Temperature (TR-HEAT-HT-W/TR-HEAT-HT-IV): -4°F to 150°F (-20°C to 66°C)
Humidity: 10% to 93% non-condensing
Thermal Ratings: Fixed Temperature Set point: 135°F (57°C)
Rate-of-Rise Detection: 15°F/min. (8.3°C/min)
High Temperature Heat: 190°F (88°C)
ELECTRICAL RATINGS
Voltage Range: 15 to 32VDC
Standby Current (@ 24 VDC): 200UA (one communication every 5 seconds with green LED enabled)
Max Alarm Current: 2mA @ 24VDC (one communication every 5 seconds with red LED enabled)
Max Current: 4.5mA @ 24VDC (one communication every 5 seconds with amber LED enabled)
COMPATIBILITY
The TR-HEAT-W series detectors are compatible with the following Triga Series FACPs:
• TR-2100R / TR-2100B
• TR-2100ECSR / TR-2100ECSB
• TR-R2100R / TR-R2100B
AGENCY LISTINGS AND APPROVALS
For exact certification listings for each model, please reference the respective agency Web site.
UL listed
FM approved
