TR-RD1G/TR-RD1R
Remote Annunciator
The TR-RD1R is a remote annunciator used to operate and program TRIGA series fire alarm control panels (FACP’s).
The remote annunciator connects to the control panel via the RS-485 system bus. When the system is in normal operation and has AC power, the Power LED is lit and all other LEDs are off. The other LEDs turn on as alarms, supervisory, troubles, system silenced and AC power losses occur.
INSTALLATION
The TR-RD1R can be surface or flush mounted. Use the optional trim ring for surface mounts. When flush mounting an electrical box is optional. If using an electrical box, use a 4S, single-gang, or double-gang box.
COMPATIBILITY
The TR-RD1G is compatible with the following Triga Series FACPs:
• TR-2100R / TR-2100B
• TR-2100ECSR / TR-2100ECSB
• TR-R2100R / TR-R2100B
- 80-character backlit LCD display (4 lines with 20 characters on each line)
- Tactile/audible feedback
- RS-485 SBUS interface to panel
- Larger keypad buttons for system reset and silence
- Initiate and end fire drills with a single key press
- View current status by alarms, supervisory, or troubles
- On-board piezo sounder audibly indicates alarms, troubles, and supervisory
- Five Status LEDs for; alarms, supervisory, trouble, silence and AC power indications
- Available in red or gray color
- UL listed, complies with NFPA 72
- Accepts user codes or fire fighter’s key
- Wiring lengths up to 6000 ft. from the FACP (depending on wire gauge and number of devices on SBUS)
TR-2100 FACP
Up to 31 TR-RD1Gs per system for
TR-2100R / TR-2100B
TR-2100ECSR / TR-2100ECSB
TR-R2100R / TR-R2100B
SPECIFICATIONS
Dimensions: 9.1”W x 7.4”H x 1.5”D (23.1W x 18.8H x 3.8D cm)
ENVIRONMENTAL
Operating Temperature: 32°F to 120°F (0°C to 49°C) Humidity: 10% to 93% relative humidity (noncondensing)
ELECTRICAL
Operating Voltage: 24VDC
Standby Current: 20mA
Alarm Current: 25mA
Wiring Distance: 6,000 ft max. from FACP
(depending on wire gauge and number of devices
on the SBUS)
Max per System: TR-2100ECSR / TR-2100ECSB (31)
ORDERING INFORMATION
TR-RD1R: Remote Annunciator. Four line LCD annunciator with 20 characters per line. Red.
TR-RD1G: Remote Annunciator. Four line LCD annunciator with 20 characters per line. Gray.
OPTIONAL ACCESSORIES
TR-5860TR: Red Trim Ring. For surface mounting. TR-5860TG: Gray Trim Ring. For surface mounting.
AGENCY LISTINGS AND APPROVALS
• FM Approved
• UL Listed
